Standards, Guideline Documents and Techniques for Inspection with Usage of MMM method

• ISO-24497-1:2007 Non-destructive testing - Metal magnetic memory - Part 1: Vocabulary.
• ISO-24497-2:2007 Non-destructive testing - Metal magnetic memory - Part 2: General requirements.
• ISO-24497-3:2007 Non-destructive testing – Metal magnetic memory - Part 3: Inspection of welded joints.

Standards:

• GOST R 52005-2003. Non-destructive testing. Metal magnetic memory method. General requirements. ... >>>
• GOST R 52081-2003. Non-destructive testing. Metal magnetic memory method. Terms and definitions. ... >>>
• GOST R 52330-2005. Non-destructive testing. Stressed-strained state test on industrial objects and transport. General requirements. ... >>>
• ST RWS 004-03. Non-destructive testing. Welded joints of equipment and constructions. Method of metal magnetic memory. ... >>>

Guideline Documents:

• GD 10-577-03. Standard instruction for metal control and lifetime prolongation of boilers, turbines and pipelines main units at thermal power stations.
• GD 34.17.446-97. Methodical guideline for engineering diagnostics of heating surface tubes of steam and hot-water boilers.
• GD 34.17.437-95. Methodical guideline for engineering diagnostics of welded joints on pipelines and vessels.
• GD 51-1-98. The technique for on-line computer diagnostics of local gas pipeline segments using the metal magnetic memory.
• GD 03-380-00. The instruction for inspection of ball vessels and gasholders for pressurized liquefied gases storage.
• GD 03-410-01. The instruction for complex engineering examination of isothermal vessels for liquefied gases.
• GD 12-411-01. The instruction for diagnostics of gas pipelines underground networks.
• GD 102-008-2002. The instruction for diagnostics of pipelines technical condition by non-contact method.
• GD 08.00-29.13.00-KTN-012-1-05. The regulations for procedure of engineering examination and lifetime prolongation of oil pipelines fitting.
• GD 16.01-60.00-KTN-085-1-05. The technique for diagnostics and certification of the ODS technological oil pipelines.
• MR-10-72-04. Methodical recommendations for technical state inspection and residual lifetime assessment for the purpose of prolongation of elevators safe operation time.

Methodical guidelines and techniques:

• Methodical guidelines for engineering diagnostics of pipelines.
• Methodical guidelines for engineering diagnostics of vessels and apparatuses.
• The technique for assessment of steam boiler drums state.
• The technique for assessment of steam turbine rotors state.
• The technique for assessment of steam turbine blades state.
• The technique for control of turbine rotors flushing holes.
• The technique for assessment of individual parts state in turbine equipment (studs, bearing inserts, etc.).
• The technique for assessment of turbine bodies, cylinders, lock and control valves state.
• The technique for assessment of generator sleeve tubes state.
• The technique for assessment of compressor system blades and rotors state.
• The technique for assessment of boiler and steampipe bends state.
• The technique for control of babbit abutment density on sliding bearing inserts.
• The technique for detecting mechanical stress concentration zones in gear wheels.
• Methodical guidelines for magnetic inspection of elevators metallic structures.
• The technique for control of crane pivots, buckets, hooks and hook hangers.
• Methodical guidelines for magnetic inspection (MMM method) of metallic structures of lifting machines.
• Methodical guidelines for engineering diagnostics of compressor-boring pipes and couplings.
• Methodical guidelines for in-pipe diagnostics of heat-exchangers.
• The technique for control of production trees at oil and gas fields.
• Methodical guidelines for engineering diagnostics of electrical rotary pump systems (ERPS) end parts.
• Methodical guidelines for noncontact magnetometric inspection of gas and oil pipelines using TSC-3M.
• Methodical guidelines for inspection of large-diameter pipelines (Ø 530-1420mm) using specialized scanning devices and the MMM method.
• Methodical guidelines for inspection of rolling-mill working and back-up rolls.
• Methodical guidelines for Ø2,0 and Ø2,6 steel wire inspection.
• Methodical guidelines for inspection of locomotive power components (frog, shaft, spline joints).
• The technique for control of stress distribution in tightened bolted joints.
• Methodical guidelines for engineering diagnostics of high-voltage line derrick guys fastening units.
• The technique for detection of mechanical stress concentration zones in products and equipment.